CUT WHEELS & PINIONS FOR
A SKELETON REGULATOR WITH GRAVITY ESCAPEMENT
by J. N. W. PAYNE
ORIGINAL DESIGN BY CLAUDE. B. REEVES
Wheels to be crossed out / Pinions supplied on stubs to be cut off and fitted to arbor
1/2/3 or 4 pinions on one stub
ALL PRICES PLUS POSTAGE & PACKING
This clock was first described in the Model Engineer between May & July 1960. It was designed by that fine clockmaker, the late Claud B. Reeve. In common with the Gravity Escapement Clock however, although the drawings provide a good a good deal of information. they do leave a much to the imagination. The articles left many unanswered questions. With this book the drawings and information on the escapement in particular have been rewritten to make it a lot easier for the construction of this Fine Regulator. Full size drawings are supplied with the book.
Cutters Module 0.6
Back To Clock Construction Books
Click here or photo for more images
Photo`s By Kind Permission Of Mr J Payne
| ITEMS | £. 00 |
| GREAT WHEEL | 19. 50 |
| CENTRE WHEEL | 14. 50 |
| THIRD WHEEL | 12. 00 |
| FOURTH WHEEL | 12. 00 |
| HOUR WHEEL | 12. 00 |
| FIRST /REVERSE & FINAL MINUTE WHEELS / 3V | 20. 00 |
| BARREL RATCHET | 16. 00 |
| MAINTAINING RATCHET | 15. 50 |
| WINDING WHEEL | 12. 00 |
| CENTRE, THIRD, FOURTH & ESCAPE PINIONS / 4 12 LEAF | 24. 00 |
| MOTION PINION 7 LEAF | 10. 00 |
| WINDING PINION 15 LEAF | 16. 00 |
| INVAR ROD (NILO) NOT THREADED 6mm x 1143mm (45") | 27. 50 |
| BOOK | 26. 00 |
Please
verify prices before ordering as prices can fluctuate due to market forces
Other Makers JOHN WILDING WILLIAM SMITH ALAN TIMMINS JOHN E TYLER LIONEL BROWN
PETER HEIMANN COLIN J THORNE IAN BEILBY ELLIOTT ISAAC